← The Vanilla Journal
Sourcing GuideOctober 2, 2026

How Vanilla Extract Manufacturers Should Think About Bean Pricing

For an extract manufacturer, vanilla beans are not a commodity bought by the kilogram — they are a source of extractable flavour, and the kilogram price is only one part of what that flavour costs. Two lots at the same price can produce very different extracts, and a cheaper lot can be the more expensive one once moisture, vanillin and the legal standard of identity are taken into account. This guide sets out how to think about bean pricing when you are making extract: what the regulations require, how moisture and vanillin change the arithmetic, and how to write a specification that buys flavour rather than water.

Quick Answer

Extract manufacturers should compare beans on cost per unit of usable flavour, not price per kilogram. Under the US standard of identity, a gallon of single-fold vanilla extract needs the equivalent of 13.35 oz of beans at no more than 25% moisture — so wetter beans mean more weight is required for the same legal strength. For most extraction, lower-moisture Grade B beans with verified vanillin deliver more flavour per dollar than Grade A, which is priced partly for appearance and suppleness. Specify moisture and minimum vanillin on the purchase order and verify them on a lot-specific certificate of analysis.

13.35 oz
Vanilla beans per US gallon for single-fold extract, calculated at ≤25% moisture (21 CFR 169.3 and 169.175)
10.0 oz
Approximate moisture-free bean solids that standard equates to per gallon
35%
Minimum alcohol by volume for US "vanilla extract"

What the Standard of Identity Actually Requires


In the United States, vanilla extract is defined in 21 CFR 169.175. It must contain at least one "unit of vanilla constituent" per gallon and at least 35% alcohol by volume. Under 21 CFR 169.3, a unit of vanilla constituent is 13.35 ounces of vanilla beans containing not more than 25% moisture — or, for beans with more moisture, the weight of beans that contains the same amount of moisture-free solids. In metric terms, that is roughly 100 g of beans per litre at 25% moisture, equivalent to about 75 g of dry bean solids per litre. Double-fold extract contains two units per gallon.

The detail that matters for purchasing is the moisture adjustment. The standard is effectively written in dry solids. If your beans are at 35% moisture, you need about 15.4 oz of them per gallon to deliver the same solids as 13.35 oz at 25%. If they are at 20% moisture, about 12.5 oz is enough. Wetter beans are not just more expensive per unit of flavour — they require more weight to meet the legal minimum.

Bean moistureBeans needed per US gallon (single-fold)Beans needed per litre (approx.)
20%~12.5 oz~94 g
25%13.35 oz~100 g
30%~14.3 oz~107 g
35%~15.4 oz~115 g

In the EU there is no equivalent compositional standard for "vanilla extract" as such; instead, Regulation (EC) No 1334/2008 governs flavouring labels, and a "natural vanilla flavouring" claim requires at least 95% of the flavouring component to come from vanilla. Labelling rules differ by market, so check them for every country you sell into. Our vanilla labelling laws comparison covers the main markets.

Why Grade A Is Usually the Wrong Buy for Extraction


Grade A (gourmet) beans are graded mainly on length, appearance and suppleness, and suppleness comes largely from moisture — typically around 30–35%. Those qualities matter when the bean is the product: in a pastry kitchen, a retail tube or a gift pack. In an extraction tank, the bean is chopped and macerated; appearance is irrelevant and the extra water is something you pay for and then must compensate for with more beans.

Grade B (extraction grade) beans are shorter, drier — typically around 15–25% moisture — and less attractive, and they are priced accordingly. Their vanillin content, measured on a dry basis, is not inherently lower than Grade A's; it depends on harvest maturity and curing, not on grade. That is why most of the extract industry uses Grade B and cuts.

The Cost-per-Litre Calculation


The useful comparison is the bean cost of producing a litre of extract that meets the standard, and then the vanillin that litre contains. The example below uses illustrative late-2026 prices and typical values; substitute your own quotes and CoA figures.

LotPrice per kg (landed)MoistureBeans needed per litreBean cost per litreVanillin (dry basis)Vanillin per litre (approx.)
Grade A$7833%~112 g~$8.702.0%~1.5 g
Grade B$3622%~96 g~$3.502.0%~1.5 g
Grade B, verified high vanillin$4222%~96 g~$4.002.6%~1.9 g
Cheap undocumented lot$2835% (unverified)~115 g~$3.201.2%~0.9 g

Three things stand out. Grade A costs more than twice as much per litre for the same flavour. The high-vanillin Grade B costs a little more per litre than standard Grade B but delivers noticeably more vanillin — a better buy for a vanilla-forward extract. And the cheap undocumented lot looks cheapest per litre while delivering the least flavour: it meets the letter of the standard on weight and still produces a thin extract. Extraction yields also depend on your process (solvent strength, time, temperature, particle size), so treat the vanillin-per-litre column as relative rather than exact.

Vanillin is not the whole flavour

Vanillin is the main flavour compound in cured vanilla and the easiest to measure, but the character of an extract also comes from hundreds of minor compounds. Two lots with the same vanillin can taste different. Use vanillin to compare value, and use tasting in your product to choose between lots of similar value.

The Specification That Changes the Economics


Once you buy on flavour rather than weight, your purchase specification changes. A good extraction-grade specification states:

ParameterTypical extraction specificationWhy
Moisturee.g. 15–25%, stated rangeDetermines how much bean weight meets the standard
VanillinMinimum, e.g. ≥1.8% on a dry basis, by HPLCDefines the flavour you are paying for
BasisDry basis stated explicitlyAvoids the as-is versus dry-basis confusion
Origin and lotRegion, harvest period, lot numberTraceability and consistency between batches
Foreign matter and mouldLimits and inspection methodFood safety and yield
TestingSupplier CoA plus right to independent testingVerification and dispute resolution
RemedyPrice adjustment or rejection if off-specShifts quality risk to where it belongs

Our guide to reading vanillin on a certificate of analysis explains the basis issue in detail, and our extract manufacturing sourcing guide covers supplier selection.

Other Variables That Affect Extract Cost


Curing quality and harvest maturity

Vanillin forms during curing from glucovanillin in the green pod. Beans harvested before maturity have less glucovanillin to begin with and never reach full vanillin, however well they are cured. A low price can be a sign of early harvest — common when prices are low or theft is high.

Cut size and handling

Cuts (broken or trimmed beans) are often cheaper still and work well for extraction, but they vary more in moisture and can carry more foreign matter. Specify and test them like any other lot.

Moisture loss in storage and transit

Beans lose moisture over time. That reduces invoice weight on arrival but does not reduce the dry solids you paid for — so a modest weight loss is not a loss of flavour. Agree in advance how weight loss is handled; our article on weight loss in transit shows the reconciliation.

Landed cost

Freight, duty, brokerage and testing add to the bean price, and they hit small orders hardest. Calculate cost per litre on landed prices, not FOB.

When Grade A Does Make Sense


Grade A is the right buy when the bean is visible or sold as a bean — whole-bean retail, pastry, premium paste with intact seeds — or when a specific lot has independently verified high vanillin and a profile you want at a price that holds up on cost per gram of vanillin. Outside those cases, paying for Grade A in an extraction tank is paying for water and appearance.

Putting It Into Practice


STEP 01

Write the specification before asking for prices

Moisture range, minimum vanillin with basis, origin, lot traceability and remedy.

STEP 02

Request lot-specific CoAs with every quote

Generic product sheets are not enough to calculate cost per litre.

STEP 03

Calculate cost per litre and vanillin per litre

Use landed price and CoA moisture and vanillin, as in the table above.

STEP 04

Run a pilot extraction

Test a paid sample in your own process and taste the result.

STEP 05

Verify the first commercial lot independently

An independent HPLC test on the first shipment sets the baseline for the relationship.

Double-Fold and Concentrated Extracts


Double-fold extract contains two units of vanilla constituent per gallon — twice the bean content of single-fold. Some manufacturers also produce higher folds by concentration or by using more beans in successive extractions. The economics scale with bean content: a double-fold extract needs twice the beans, so moisture and vanillin matter twice as much per litre. Concentrated extracts can be efficient for industrial customers who dilute on site, but labels must reflect the fold accurately.

For export, remember that the standard of identity applies to products sold as "vanilla extract" in the US. A product made for another market may be governed by different rules, and a US product sold abroad may need relabelling. Keep the fold, alcohol content and bean content documented batch by batch so that you can prove compliance wherever you sell.

Finally, keep records. Batch records linking each extract lot to the bean lots, their CoAs and the bean weight used are what let you prove the fold on your label, trace a quality problem back to its source and negotiate with suppliers from evidence rather than impressions.


Frequently Asked Questions


Is Grade A or Grade B vanilla better for making extract?

For most extraction, Grade B. Grade A is priced partly for appearance and moisture, which do nothing in an extraction tank, and its higher moisture means you need more bean weight to meet the legal standard. Grade B with verified vanillin usually delivers more flavour per dollar.

How many vanilla beans are needed per litre of extract?

Under the US standard, single-fold extract needs 13.35 oz of beans per gallon at no more than 25% moisture — about 100 g per litre. Wetter beans require proportionally more weight; at 35% moisture, about 115 g per litre.

What vanillin content should I specify for extraction-grade beans?

Many buyers specify a minimum of around 1.5–2.0% on a dry basis, measured by HPLC, with higher minimums for premium extracts. State the basis explicitly, because as-is figures are lower than dry-basis figures for the same beans.

How does moisture affect the cost of vanilla extract?

The US standard is effectively defined in dry bean solids, so higher-moisture beans require more weight per gallon. You pay for the water and then need more beans to compensate, which raises the bean cost per litre.

Does vanilla extract have a legal definition in the EU?

The EU regulates flavouring labels rather than defining "vanilla extract" compositionally. Under Regulation (EC) No 1334/2008, a "natural vanilla flavouring" claim requires at least 95% of the flavouring component to come from vanilla. National rules and customer requirements also apply.

Are vanilla cuts good for extraction?

Yes. Cuts are widely used for extraction and are usually cheaper than whole Grade B beans. They vary more in moisture and foreign matter, so specify and test them like any other lot.

Why does a cheap vanilla lot make weak extract?

Usually because the beans were harvested before maturity or poorly cured, so they contain less vanillin, or because they carry extra moisture. A lot can meet the legal bean weight and still produce a thin extract. A lot-specific CoA showing vanillin on a dry basis is the protection.

Sourcing beans for extraction?

We supply Indonesian extraction-grade vanilla with moisture and vanillin stated on a lot-specific certificate of analysis.

Get in Touch
© 2026 Vanilla Roots · vanillaroots.comAdmin